Free Online Library Of Help Files. Read help files in convenient way.

Leading Translation Management System for Translation Agencies, Top Translation Management Software for Freelance Translators, Time Tracking Software, Word Count, Character Count and Line Count Software, Computer Assisted Translation Tool for Easy Word Count, Clipboard Character Count Software, User-Friendly Translation Memory Software, Terminology Management Software, Terminology Management Server, Microsoft Glossary Software, Dictionary of Acronyms, Social Network for Translators and Translation Agencies, Acronyms and Abbreviations Search Engine, Russian Translation Lab, Ukrainian Translation Lab.

You are reading help file online using chmlib.com

Configuring a Floppy Drive

You can configure up to two 1.44MB floppy drives. You can use physical drives available on the host computer or floppy image files. However, a floppy drive can be used only by the host operating system or by one virtual machine at a time. If you run more than one virtual machine simultaneously, you may wish to select which one (if any) has access to the drive. To disable or enable access to a floppy drive while a virtual machine is running, choose the drive from the VM > Removable Devices menu.

Note: Workstation supports USB floppy drives as USB devices rather than as floppy drives. See Configuring a USB Port for information on configuring a USB floppy drive.

You can set the following options under Device status:

• Connected — Check or uncheck this option to connect or disconnect the drive or floppy image path while the virtual machine is running.
• Connect at power on — Check this option if you want the drive or floppy image path to be connected automatically whenever you power on the virtual machine. You can change this setting when the virtual machine is powered on or powered off.

You can set the following options under Connection:

• Use physical drive — Select this setting if you want the virtual machine to use a physical drive on the host computer. If you have more than one physical drive, use the drop-down list to specify which drive to use.
• Use floppy image — Select this setting if you want to use a floppy image file. To create a new file, type in a path and file name, then click Create. To use an existing file, click Browse and locate the floppy image file you want to use.

If you are adding a new floppy drive, click Add to install the device.

To remove an existing drive, select that drive, then click Remove.

Click OK to save the configuration and close the virtual machine settings .

Back to top